Vanliga frågor

1. If you cannot login to the simulator pleas try to reset your password by going to www.roctimsim.com/password_reset/ 2. If you still cant login please email simulator@roctim.com

1. Enter a name and press + button

1. Open the toolbox 2. Open the category of the machine that you want to add or serch for the item in the search box 3. While hovering the item you would like to add press the left mouse button and drag the item onto the drawing area and release, you can adjust the position afterwards pressing the left mouse button and drag the item to its desired position. 4. Save the plant

1. Hover the machine/item 2. Press the delet button (trash can) 3. Confirm 4. Save plant

1. Press the output dot (grey) and hold down the left mouse button 2. Drag the mouse pointer (while holding down the left mouse button) to the desired input of the other machine/item and realse the left mouse button 3. Save the plant

1. Press and hold the left mouse button on the entry point of the connection 2. Drag the mouse anywere on the drawing area and release the buttons 3. Save plant

1. Hover over the box where the values appear 2. Click the cog wheel 3. Uncheck all values that you do not want to see and make sure that the ones that you want to see are checked 4. Click the cross and save the plant This works for both stream labels and machine labels.

Yes. 1. Open a source item 2. Click select PSD 3. Click "+" button 4. Enter name and sivesize and percentage passing in the input filed. Separate sivesizes and percentage passing with "," 5. Press the ok button 6. An calculated PSD will show click ok button to store the PSD 7. Select the one you just created 8. Press update to apply the selected PSD

Yes you can! 1. Press the sharing settings button 2. Inster the email address to the person that you would like to share you plant with 3. Select permission (wrench = write access, eye = read access), you can change this later if you want 4. Press + button to add the person toy you plant (you can remove a person later)

Yes! 1. Run a simulation 2. Press the generate report button 3. A PDF file will be created and downloaded (depending on your browser)

1. Click the connection 2. Hover the white point, press mouse button and drag to desired location 3. Click outside the connection to deselect.

1. Click the equipments that you would like to move 2. Hold down mose button and move to desired position

Ýes it is possible to add a text note to your flowchart. Follow these steps: 1. Open the toolbox 2. Open utils menu 3. Drag "Note" and drop it on the flowchart 4. Enter text into the text field You can also drag around the note exactly as you do for the machines, delete it and also resize it by grabbing the right down corner. See video how this is done.

Yes it is possible to select between a linear interpolation and Swebrec interpolation. How you can do that is show below: 1. Select the PSD configuration button 2. Click add custom PSD (plus sign) 3. Enter name and values 4. If you would like the interpolation to be linear check the check box, otherwise it will be interpolated by Swebrec 5. Click the finish button and check you interpolated PSD

Yes, it is possible to move both the process display box and configucation box. 1. Hold down left mous button on the move button (the move button will show up when you hover the process display box) 2. Move the box to the location you want ad release the left mouse button You can always reset the view by pressing the reset button.